Recon Independent Assessments brings the weather, you supply the well constructed building envelope and quality driven team.
2010 is already shaping up to be another year of growth for Recon as the word spreads regarding the affordability and value our third party field testing is known for.
When you're looking for a third party testing agency, don't hesitate to call on Recon for a proposal.
Fax: 321-206-4567 your specs to us or email them: info@gorecon.net
We'll call you to discuss the project and our proposal.
Recon has never met a Curtain Wall, Window, Skylight, or Storefront it didn't like...
Wednesday, December 30, 2009
Wednesday, December 23, 2009
Merry Christmas To All
Recon Independent Assessments would like to wish all of it's clients a very Merry Christmas. All of the work over the past year has taken us around this great country and allowed us to meet many of the fine people that make America the greatest country in the World.
We look forward to time with family and friends over the next few days.
Enjoy!
We look forward to time with family and friends over the next few days.
Enjoy!
Friday, December 18, 2009
Moisture Mapping Survey with Sliding Glass Door and Window Installation Validation
Recon Independent Assessments had the pleasure of joining the team conducting an exterior re-cladding project along the beach in Virginia Beach. A couple of long days were required to overcome the obstacles presented by working in an environment where occupants were present.ASTM E-783 and ASTM E-1105 testing was conducted throughout the 15 story condominium. Four types of fenestration were encountered.
A comprehensive survey was conducted throughout many of the individual units in the structure to assist in understanding potential sources of water intrusion from a recent nor'easter that affected the area with high winds and rain.
A comprehensive survey was conducted throughout many of the individual units in the structure to assist in understanding potential sources of water intrusion from a recent nor'easter that affected the area with high winds and rain.
Recon Independent Assessments is available for your project.
Wednesday, December 16, 2009
Moisture Intrusion Survey & Window / Sliding Glass Door Testing Underway
Recon Independent Assessments has deployed to Virginia Beach to provide services.
Recon's proposal, references, and flexibility in scheduling on short notice makes it an easy choice for architects and owners.
Saturday, December 5, 2009
The Spec Book Says: Qualified Field Testing Agency
You are in the right place!
Did it say save on testing cost by using Recon Independent Assessments? You will.
Recon Independent Assessments has developed a very effective approach to field testing windows, curtain walls, and storefronts that allows for efficiency to increase the value you get when testing. Long gone are the long hours spent building elaborate and clumsy vaccum chambers for an ASTM E 1105.
Day rate is the standard pricing unit in field testing. Make sure to get a clear understanding of the number of openings that can or will be tested per day.
Recon Independent Assessments will allow you to test more. Contact us today to learn how.
info@reconwindowtesting.com to request a free consultation to discuss your project testing needs.
Engineer review of testing reports available upon request.
Did it say save on testing cost by using Recon Independent Assessments? You will.
Recon Independent Assessments has developed a very effective approach to field testing windows, curtain walls, and storefronts that allows for efficiency to increase the value you get when testing. Long gone are the long hours spent building elaborate and clumsy vaccum chambers for an ASTM E 1105.
Day rate is the standard pricing unit in field testing. Make sure to get a clear understanding of the number of openings that can or will be tested per day.
Recon Independent Assessments will allow you to test more. Contact us today to learn how.
info@reconwindowtesting.com to request a free consultation to discuss your project testing needs.
Engineer review of testing reports available upon request.
Friday, December 4, 2009
The AAMA 501.2 Field Quality Control Check
Commonly refered to as the "nozzle" or "hose" test, the AAMA 501.2 is not an actual validation test at all.
The AAMA 501.2 is a great tool to check progress on a project and to prepare for a third party field test, but the procedure does not validate the opening or system as having been successfully installed.
A brief outline of how to perform the AAMA 501.2 can be found by clicking here: How To Perform A Field Quality Control Check
The ASTM E 1105 is the test procedure that uses differential pressure to validate the opening.
As previously discussed here, the E 1105 is the test procedure used even when following AAMA 502 & 503 test standards.
Knowing the proper test methods for validating installation is important. Using them effectively at benchmarks in the construction life cycle is paramount.
If you have questions regarding the proper method or procedure for any of them, contact Recon. We'll be happy to spend the time with you on the phone to help you better understand the differences and uses of each.
The AAMA 501.2 is a great tool to check progress on a project and to prepare for a third party field test, but the procedure does not validate the opening or system as having been successfully installed.
AAMA 501.2 Field Quality Control Check
Available by Day Rate:
(includes on-site testing services and written report)
Call today to schedule: 407-948-4983
A brief outline of how to perform the AAMA 501.2 can be found by clicking here: How To Perform A Field Quality Control Check
The ASTM E 1105 is the test procedure that uses differential pressure to validate the opening.
As previously discussed here, the E 1105 is the test procedure used even when following AAMA 502 & 503 test standards.
Knowing the proper test methods for validating installation is important. Using them effectively at benchmarks in the construction life cycle is paramount.
If you have questions regarding the proper method or procedure for any of them, contact Recon. We'll be happy to spend the time with you on the phone to help you better understand the differences and uses of each.
Thursday, December 3, 2009
Water Intrusion Testing For Windows
Recon Independent Assessments is fully capable of providing field testing for windows, storefronts, curtain walls, sliding glass doors, and skylights anywhere in the nation.
Our consultants are ready to pack up the necessary tools, instruments and their expertise and meet you on the job site to administer ASTM E 1105, AAMA 502 & AAMA 503 testing protocols.
Send us your project requirements and we'll gladly prepare an estimate of cost based on the specifications and call you to discuss the details.
We'll likely be looking at airfare before we hang up with you.
Our consultants are ready to pack up the necessary tools, instruments and their expertise and meet you on the job site to administer ASTM E 1105, AAMA 502 & AAMA 503 testing protocols.
Send us your project requirements and we'll gladly prepare an estimate of cost based on the specifications and call you to discuss the details.
We'll likely be looking at airfare before we hang up with you.
Recon Provides ASTM Window Testing At A Resonable Cost
The cost of not testing can mean your reputation.
The effects of wind driven rain on a building are multifaceted.
The kinetic energy contained within the rain drops along with the differential pressure caused by the wind can lead to water travelling upwards on glass surfaces. Combine those effects with absorption and capillary action and it is easy to understand why wind driven rain causes moisture intrusion at openings where vertical rain events do not.
The ASTM E 1105 field test is the best tool available for simulating wind driven rain conditions.
Most Division 8 Specifications now call for Field Testing to sample randomly selected opening for water penetration resistance.
Recon Independent Assessments can provide field testing services on your project. Contact us today for a proposal of cost to perform services.
Recon Independent Assessments works nationwide, just let us know where we're needed. We'll be there.
The effects of wind driven rain on a building are multifaceted.
The kinetic energy contained within the rain drops along with the differential pressure caused by the wind can lead to water travelling upwards on glass surfaces. Combine those effects with absorption and capillary action and it is easy to understand why wind driven rain causes moisture intrusion at openings where vertical rain events do not.
The ASTM E 1105 field test is the best tool available for simulating wind driven rain conditions.
Most Division 8 Specifications now call for Field Testing to sample randomly selected opening for water penetration resistance.
Recon Independent Assessments can provide field testing services on your project. Contact us today for a proposal of cost to perform services.
Recon Independent Assessments works nationwide, just let us know where we're needed. We'll be there.
Wednesday, December 2, 2009
Professional Field Testing of Installed Windows Using ASTM or AAMA Protocols
Recon Independent Assessments has travelled the country over the past year providing field testing using ASTM E 1105, ASTM E 783, AAMA 502, AAMA 503, & AAMA 501.2 testing methods to help ensure project succcess for owners, contractors and installers.
Recon is looking forward to seeing familiar faces in 2010 as well as new ones.
Subscribe to:
Posts (Atom)